Concrete Patio Cost in Dallas GA: Complete 2026 Pricing
If you’ve been collecting ballpark numbers for a new concrete patio in Dallas, GA, here’s the honest picture: a standard broom-finish patio runs $6–$10 per square foot, while stamped concrete runs $10–$18 per square foot. A 300 sq ft patio — large enough for a table, chairs, and a grill — costs $1,800–$3,000 standard or $3,000–$5,400 stamped. What actually determines where your project lands in those ranges is the subject of this guide.
In this post, we cover: patio finish options and their costs, what drives prices up or down in Paulding County, what’s included in a complete project, and how to compare estimates for your Dallas, GA patio project.
Free Concrete Patio Estimates in Dallas, GA
Dallas Concrete provides detailed written quotes for patios throughout Paulding County. Call (888) 376-0955.
Why Concrete Patio Pricing in Dallas GA Is What It Is
Concrete patios in Georgia are priced by the square foot, but the per-square-foot rate is only part of the story. A small, irregularly shaped patio with limited access may cost more per square foot than a large, simple rectangle because of the labor-intensive form work and finishing on custom shapes. Dallas, GA patio costs also reflect the local soil reality: Paulding County’s expansive red clay soil requires excavation deeper than the slab itself, followed by installation of a compacted gravel base to prevent the clay’s seasonal swelling and shrinking from cracking the slab within a few years.
Homeowners in Seven Hills and throughout the Dallas area are investing in concrete patios that will last 25–30 years with proper drainage and maintenance — not the 5–10 year disappointment of a slab poured directly on native clay without a base.
Patio Finish Options and Costs in Dallas GA
Broom finish (plain): $6–$10 per sq ft. The standard concrete patio finish — a broom texture that provides grip and a clean appearance. Cost-effective and durable for most residential applications in Dallas, GA.
Exposed aggregate: $7–$11 per sq ft. The surface cement paste is washed away to expose decorative stone aggregate. Provides natural texture variation and handles Georgia’s wet/dry seasonal cycles well.
Stamped concrete: $10–$18 per sq ft. Rubber stamp mats pressed into the concrete while it’s still plastic create patterns that replicate flagstone, cobblestone, running bond brick, or wood plank. Color hardeners add depth and variation. See our stamped concrete service page for pattern options specific to the Dallas, GA market.
Colored/stained: $7–$12 per sq ft depending on whether color is integral to the mix or applied as a post-cure stain. Adds visual interest to a plain slab without the full cost of stamping.
Practical Uses: What Changes Patio Pricing in Paulding County
- Patio size: Larger projects benefit from economy of scale on material delivery and setup costs — a 500 sq ft patio has a lower per-sq-ft cost than a 150 sq ft patio from the same contractor.
- Shape complexity: Curved edges, multiple angles, and custom shapes require more form work and finishing skill, adding cost compared to a simple rectangle.
- Base preparation: Red clay in Paulding County neighborhoods like Pickens Bluff requires 4–6 inches of compacted gravel beneath the slab — standard and necessary, but adds material and excavation cost.
- Demo of existing surface: Removing an old patio or wood deck adds $2–$3 per sq ft in demo and hauling.
- Drainage design: Patios that drain toward the house foundation require grading corrections. Getting the slope right (minimum 1/8 inch per foot away from the structure) adds minor cost but prevents major foundation drainage problems later.
- Site access: Patios enclosed by fencing or with limited equipment access require manual delivery, adding to labor cost.
How Concrete Patio Installation Works in Dallas
A concrete patio project in Dallas, GA begins with layout and excavation. The area is dug out to accommodate both the base material and slab thickness — typically 6–8 inches below final grade for a 4-inch slab on a 4-inch gravel base. The gravel is installed and compacted, forms are set to the patio shape, and reinforcement mesh or rebar is placed.
The concrete is poured, screed level, and finished to the specified texture. Control joints are tooled or cut into the surface to direct cracking. After finishing, the slab is protected from the elements and cured — particularly important in Dallas’s summer heat, where rapid moisture loss in July and August can weaken the surface if not managed with curing compound. Sealing is applied at 28 days for plain concrete, and every 1–2 years thereafter for stamped surfaces to maintain color.
The City of Dallas requires a permit and inspection before any slab pour — read our Dallas, GA building permit guide for concrete for the full process.
Planning a Patio in Dallas, GA?
Get a free written estimate from Dallas Concrete. We serve Seven Hills, Savannah Lakes, and all of Paulding County.
What a Complete Patio Project Costs in Dallas GA
For a realistic budget, add the base slab cost plus any additional scope. A 300 sq ft standard patio with no demo, straightforward access, and a simple rectangle shape runs $1,800–$3,000. Add $600–$900 for demo of an existing surface. Add $300–$600 for a curved or custom shape. A stamped 300 sq ft patio with those same additions runs $3,000–$5,400 plus demo.
These are strong estimates for current Dallas, GA market conditions, but actual pricing depends on your specific site. Contractors serving Acworth and Powder Springs may price slightly differently based on travel, but market rates across the northwest Atlanta metro are broadly consistent.
Frequently Asked Questions
What’s the cheapest type of concrete patio in Dallas GA?
A basic broom-finish concrete slab is the most cost-effective patio option in Dallas, GA at $6–$10 per square foot. For a 200 sq ft patio, that’s $1,200–$2,000. Plain concrete is durable, low-maintenance, and holds up well to Paulding County’s clay soil conditions when properly installed with a compacted gravel base. For ideas on adding visual interest without the full stamped cost, ask about simple border patterns or integral color.
Does a concrete patio need a permit in Dallas, GA?
Within Dallas city limits, a permit and pre-pour inspection are required for concrete slabs. Call 770-443-8110 ext. 1203 to schedule with Bureau Veritas. For unincorporated Paulding County, requirements may differ. Dallas Concrete advises on permit requirements at the estimate stage and coordinates all permitting for projects we install. See our Dallas, GA concrete permit guide for specifics.
How do I compare patio estimates in Dallas GA?
Compare estimates on equal scope — make sure each estimate specifies the same slab thickness, base preparation depth, reinforcement type, and finish. An estimate that’s significantly lower than others is often missing the base prep or using thinner concrete. Ask specifically how each contractor handles base preparation for Paulding County’s red clay. Read our best concrete contractors guide for Dallas for a full vetting checklist.
Get Your Concrete Patio Cost in Dallas GA
Dallas Concrete serves Dallas, Hiram, Acworth, and Paulding County with transparent patio pricing. Call (888) 376-0955.
Related: